MODELS
The models of rapid impact compactors produced by the company include HC04, HC08, HC12, HC16, HC20, HC36, HC42, HC60, HC84, and HC150. In the field of highways, HC36 and HC42 rapid impact compactors are widely used. The specific technical parameters are as follows The picture shows you, you can refer to the table below when choosing. The model parameters in the figure below are standard design parameters. If you have special needs, please feel free to consult.
1. HC04 hammer weight is 500kg, impact energy is 4KJ, working height is 2450mm, standard tamper plate diameter is 560mm, working mass is 1.3t, effective depth is 0.4-1.0m, suitable for 7-13t excavator or 1-2t loader;
2. The weight of HC08 hammer is 800kg, the impact energy is 8KJ, the working height is 2450mm, the diameter of the standard tamper plate is 560mm, the working mass is 1.7t, the effective depth is 0.4-1.0m, and it is suitable for 7-13t excavator or 1-2t loader;
3. The weight of the HC12 hammer is 1200kg, the impact energy is 12KJ, the working height is 3230mm, the diameter of the standard tamper plate is 630mm, the working mass is 2.7t, the effective depth is 0.8-1.5m, and it is suitable for 18-30t excavator or 3-4t loader;
4. The weight of HC16 hammer is 1600kg, the impact energy is 16KJ, the working height is 3230mm, the diameter of the standard ramming plate is 630mm, the working mass is 3.1t, the effective depth is 0.8-1.5m, and it is suitable for 18-30t excavator or 3-4t loader;
5. HC20 hammer weight is 2000kg, impact energy is 20KJ, working height is 3510mm, standard tamper plate diameter is 630mm, working mass is 3.6t, effective depth is 1-1.8m, suitable for 25-36t excavator or 4-5t loader;
6. HC36 hammer weight is 3000kg, impact energy is 36KJ, working height is 3730mm, standard ram plate diameter is 1000mm, working mass is 5.8t, effective depth is 1.5-3.0m, suitable for 30-40t excavator or 5-6t loader;
7. HC42 hammer weight is 3500kg, impact energy is 42KJ, working height is 3730mm, standard tamper plate diameter is 1000mm, working mass is 6.3t, effective depth is 1.5-3.0m, suitable for 30-40t excavator or 5-6t loader;
8. The weight of HC60 hammer is 5000kg, the impact energy is 60KJ, the working height is 44600mm, the diameter of the standard ramming plate is 1000mm, the working mass is 8.8t, the effective depth is 2-4m, and it is suitable for 36-49t excavator or loader above 8t;
9. The weight of HC84 hammer is 7000kg, the impact energy is 84KJ, the working height is 4900mm, the diameter of the standard ramming plate is 1000mm, the working mass is 11.9t, the effective depth is 3-6m, and it is suitable for 40-60t excavators or loaders above 12t;
10. HC150 hammer weight is 10000kg, impact energy is 150KJ, working height is 5700mm, standard tamper plate diameter is 1250mm, working mass is 16.5t, effective depth is 4-10m, suitable for excavators above 70t or excavators above 49t to change the boom.
HC series rapid impact compactor can be matched with various brands of excavators or loaders on the market. The installation is very simple and the operation is convenient. After the purchase, the after-sales staff will also come to install and debug, so there is no need to consider how to install and other issues.
The effective compaction depth of HC series rapid impact compaction equipment can reach 10m at maximum and 0.4m at minimum. In roadbed filling construction, HC36 rapid impact compaction machine is mostly used, and HC42 is also used in a small part. HC series rapid impact compaction equipment has 3 compaction gears, suitable for PLC remote control of compaction strength and frequency. After the test, after using 3 gears and 9 hammers to reinforce the bridge back transition area with a compaction degree of 96%, the settlement near the abutment is greater than 100mm, most of which are 150~250mm, and some are about 300mm. The settlement in the normal rolling area is mostly About 100mm, the settlement amount of the heavy earth moving vehicle repeatedly rolled is 20~60mm. After the high fill roadbed is filled in layers, the settlement amount is 120~180mm every 2m. After the old roadbed of the widened road is excavated and rolled For reinforcement, the average settlement is 200~250mm. You can choose a suitable rapid impact compaction machine according to the above test data.
HC series rapid impact compaction machines have been widely used in projects all over the country. As a new type of compaction machinery, rapid impact compactors have the characteristics of large compaction energy and flexibility. Deep soil compaction provides a fast and effective tool for the compaction reinforcement of platform backs, fill and excavation joints, and high fill sections in expressway construction.
